Compliance information
www.tek.com
1
This product is intended for use in nonresidential areas only. Use in residential areas
may cause electromagnetic interference.
2
Emissions which exceed the levels required by this standard may occur when this
equipment is connected to a test object.
3
For compliance with the EMC standards listed here, high quality shielded interface
cables should be used.
Australia / New Zealand Declaration of Conformity – EMC
Complies with the EMC provision of the Radiocommunications Act per
the following standard, in accordance with ACMA:
CISPR 11. Radiated and Conducted Emissions, Group 1, Class A,
in accordance with EN 61326-1.
14
RSA306B and RSA306B-SMA Installation and Safety Instructions
