Tektronix Profile Pro II User Manual Download Page 318

Page: 318 / 370

Chapter 10 Using TimeDelay

318

Profile PRO Series

Getting Started with TimeDelay

Here are two different methods that you can use to launch TimeDelay:

• Double click on the TimeDelay shortcut icon on the desktop. When the

TimeDelay window appears, you can use the default settings that include one
record and one playback panel (see Figure 164).

• Double click on a TimeDelay project file (.tdx). This launches TimeDelay

using the configuration saved in the file.

NOTE: TimeDelay uses the standard Windows NT interface. For
help with Windows NT interaction, refer to Microsoft NT manuals.

To exit TimeDelay:

• Choose

File | Quit

Figure 164. TimeDelay window

Summary of Contents for Profile Pro II



















































































































































































































































































































































































Search results

Summary of Contents for Profile Pro II

Reviews:

Brands by name

Popular brands

Tektronix Profile Pro II, User Manual

Search results

Summary of Contents for Profile Pro II

Reviews:

Brands by name

Popular brands