PDR 200 9GB Disk Drive Upgrade
1
PDR200 9GB Disk Drive Upgrade
Introduction
This upgrade adds four internal 9GB hard disks to the PDR200 system.
The manual assumes that you are adding four internal 9GB disk drives either to
a 2-channel PDR200 (one with only a Master Enhanced Disk Recorder board)
or as part of upgrading to a 4-channel PDR200 (one with both Master and Slave
Enhanced Disk Recorder boards). If you are upgrading your Profile system
from a 2-channel to a 4-channel, you will need to install the Slave Enhanced
Disk Recorder board before you perform this upgrade.
This installation manual includes instructions for:
1. Installing the additional internal 9GB disk drives.
2. Verifying the PDR200 can access the new drives.
NOTE: Before performing this upgrade, be sure to back up any material you
want to save. Creating the disk file system destroys all material on the hard
disk drives.
Related Documents
Related documents are:
• Profile Family User Manual
• PDR200 Installation Manual
• PDR200 Service Manual
