Tektronix PG 508, Instruction Manual

Page: 153 / 182

TM 11-6625-2980-14
APPENDIX C
COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LISTS
Section I. INTRODUCTION
B-1. SCOPE
This appendix lists components of end item and basic
issue items for the pulse generator to help you inventory
items required for safe and efficient operation.
B-2. GENERAL
The Components of End Item and Basic Issue Items
Lists are divided into the following sections:
a. Section II. Components of End Item. This listing is
for informational purposes only, and is not authority to
requisition replacements. These items are part of the
end item, but are removed and separately packaged for
transportation or shipment. As part of the end item,
these items must be with the end item whenever it is
issued or transferred between property accounts.
Illustrations are furnished to assist you in identifying the
items.
b. Section III. Basic Issue Items. These are the
minimum essential items required to place the pulse
generator in operation, to operate it, and to perform
emergency repairs. Although shipped separately
packaged, BII must be with the pulse generator during
operation and whenever it is transferred between
property accounts. The illustrations will assist you with
hard-to-identify items. This manual is your authority to
request/requisition replacement BII, based on
TOE/MTOE authorization of the end item.
B-3. EXPLANATION OF COLUMNS
The following provides an explanation of columns found
in the tabular listings:
a. Column (1) - Illustration Number (Illus Number).
This column indicates the number of the illustration in
which the item is shown.
b. Column (2) - National Stock Number. Indicates
the National stock number assigned to the item and will
be used for requisitioning purposes.
c. Column (3) - Description. Indicates the Federal
item name and, if required, a minimum description to
identify and locate the item. The last line for each item
indicates the FSCM (in parentheses) followed by the
part number.
d. Column (4) - Unit of Measure (U/M). Indicates the
measure used in performing the actual operational/
maintenance function. This measure is expressed by a
two-character alphabetical abbreviation (e.g., ea, in, pr).
e. Column (5) - Quantity required (Qty rqr). Indicates
the quantity of the item authorized to be used with/on
the equipment.
C-1