Current transducer instructions
Recommended accessories
The following accessories can be ordered for the transducers:
Accessory
Part number
Interface cable, connects CT-S series and CT-M series
transducers to PA4000
Tektronix part number 174-6354-00
M series cable adapter, connects CT-M series transducers to interface cable,
part number 174-6354-00
Tektronix part number 174-6353-00
CT-1000-S power cable adapter
, connects CT-1000-S power leads to Keithley
2220 dual output power supply
Tektronix part number 174-6436-00
Power supply, dual output, ±15 V @ 1 A each (order directly from Keithley)
Keithley model number 2220
1
Connections between CT-M series transducers and the PA4000 require a cable adapter. Order Tektronix part number 174-6353-00.
2
The CT-1000-S transducer requires an external power supply; Keithley model number 2220 is a recommended supply.
Important safety information
This document contains information and warnings that must be followed by the
user for safe operation and to keep the product in a safe condition.
This product is rated for use with circuits up to 600 V, CAT II maximum.
Do not touch this product while the circuit under test is energized.
General safety summary
Use the product only as speci
fi
ed. Review the following safety precautions to
avoid injury and prevent damage to this product or any products connected to it.
Carefully read all instructions. Retain these instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow
generally accepted safety procedures in addition to the safety precautions speci
fi
ed
in this manual.
The product is designed to be used by trained personnel only, who are aware of
the hazards involved.
Only quali
fi
ed personnel who are aware of the hazards involved should remove
the cover for repair, maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is
operating correctly.
This product is not intended for detection of hazardous voltages.
Use personal protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
When incorporating this equipment into a system, the safety of that system is the
responsibility of the assembler of the system.
6
PA4000 Power Analyzer
