Tektronix P7625, Quick Start User Manual

Page: 83 / 88

Maintenance
Handling the Probe
The P7600 Series probes are precision high-frequency devices; exercise care when you use and store the probe. The probe
and cable are susceptible to damage caused by careless use. Always handle the probe at the control box and probe body to
avoid undue physical strain to the probe cable, such as kinking, excessive bending, or pulling. Visible dents in the cable will
increase signal aberrations.
CAUTION. To prevent damage to the probe, always use an antistatic wrist strap connected to a static-controlled workstation when
you handle the probe. The probe input contains electronic components that can be damaged by contact with high voltages,
including static discharge.
Observe the following precautions when using the probe. Do not do any of the following:
Drop the probe or subject it to physical shock
Subject the probe to adverse weather conditions
Kink or fold the probe cable tighter than a 2 inch radius
Solder the tips with excessive heat or duration
P7600 Series TriMode Probes Quick Start User Manual 69