Tektronix P7313SMA, Technical Reference

Page: 60 / 62

Optional Accessories
Optional Accessories
The optional accessories that you can order for the P7313SMA differential probe are listed below. (See Table 10.)
Table 10: Optional accessories
Description Accessory
Phase adjuster. Use two phase adjusters if you need to
bring the skew between inputs to 1 ps or less because of
skew in the device under test differential signal path. (See
page 19,
Adjusting Cable Skew .)The phase adjuster has
a 25 ps adjustment range.
The matched-delay SMA cables that come with your probe
have a
≤ 1 ps skew at the cable ends.
Tektronix part number: 015-0708-XX (package of 1)
80A03. The 80A03 TekConnect Probe Interface Module is
an adapter that allows you to use TekConnect probes with
CSA8000 and TDS8000 Series sampling oscilloscopes and
80E0X sampling modules.
The interface contains an enclosure that houses a
compartment for one 80E0X electrical sampling module
and two TekConnect probe inputs. The interface routes the
probe signal outputs through SMA connectors on the front
panel. Semi-rigid SMA cables link the probe outputs to the
80E0X module inputs.
The 80A03 Interface Module is required to complete a
performance veri
fi cation of the probe.
48 P7313SMA Technical Reference