P6106A Passive Probe
P6106A Instruction Manual
11
Table 3: Certifications and compliances (Cont.)
Overvoltage
Category
Category:
Examples of Products in this Category:
CAT III
Distribution-level mains, fixed installation
CAT II
Local-level mains, appliances, portable
equipment
CAT I
Signal levels in special equipment or parts of
equipment, telecommunications, electronics
Pollution Degree 2
Do not operate in environments where conductive pollutants may be
present.
Safety
UL3111-1, First Edition & IEC61010-2-031, First Edition
CSA C22.2 No. 1010.1-92 & CAN/CSA C22.2 No. 1010.2.031-94
EN61010-1/A2
EN61010-2-031
Pollution Degree 2
Maintenance
The information in this section will help you maintain your probe for a long
service life.
To prevent damage to probe materials, avoid using chemicals that contain
benzene, toluene, xylene, acetone, or similar solvents.
Remove accumulated loose dust from the probe exterior using a soft cloth or
small brush. Remaining dirt may be removed with a soft cloth dampened with a
mild detergent and water solution, or isopropyl alcohol. Do not immerse the
probe or use abrasive cleaners.
The probe can be disassembled into three easy-to-replace modules: the probe
head, the cable assembly, and the compensation box assembly. Refer to Figure 8.
Individual components within the compensation box are not replaceable.
NOTE
. The probe head, cable, and compensation box are not interchangeable
between probe options. Be certain to specify Standard or Option 01 when
ordering replacement parts.
Cleaning
Replacing Probe Modules
