Accessories
THV-Browser
The THV-Browser allows you to
set and lock the spacing between
two handheld probe tips, and then
browse your circuit with one hand.
Handheld Browsing.
1.
Place each TP175-FL
handheld probe into the
cavity and then slide the probe
forward to lock it into place.
2.
Loosen the thumb screw and
adjust the spacing between
the probe tips. Graticules
near the thumb screw indicate
the spacing. The maximum
spacing is ~1 in (2.54 mm).
3.
Tighten the thumb screw.
You can now browse your circuit.
WARNING.
To avoid injury or
short circuits, do not drop the
THV-Browser on high voltage
circuitry. The browser contains
metal components.
Hands-free Probing.
If you want a stationary, hands-free
connection, attach the browser to
the TPH1000 probe holder:
4.
Align the slots on the top of the
probe holder with the pins on
the bottom of the browser.
5.
Rotate the browser 90° and
making sure that the Tektronix
logo on the probe holder faces
the circuit under test.
6.
Position the probe tips on your
test points so that you can set
the holder on a stable surface.
Order Tektronix part number:
THV-Browser
21
P5200A Series High Voltage Differential Probes Instruction Manual
Summary of Contents for P5200A
