MTS4EA License Upgrade Instructions
3
Options Permissions Upgrade
These instructions are for personnel who are familiar with servicing the product.
If you need further details refer to the appropriate product manual. Contact your
nearest Tektronix, Inc., Service Center for installation assistance.
NOTE
. Each MTS4EA software key (dongle) contains two sets of permissions:
one for the enabled MTS4EA options, and another for the user licenses. Since
separate processes are used to upgrade the options permissions and the user
licenses stored in the dongle, you can upgrade the options permissions and the
user licenses in any order.
Options Permissions Upgrade Procedure
The software key (dongle) stores the permissions for the enabled MTS4EA
options. The options permissions are upgraded using an update program and an
encrypted data file. Tektronix provides these files either by floppy disk or
CD-ROM with this kit, or by email.
Perform the following steps to upgrade the MTS4EA options permissions:
CAUTION.
To prevent an upgrade failure, your computer or Tektronix MPEG
instrument must have the associated MTS4EA software key (dongle) installed.
Be sure that the dongle you are updating is the one you specified in the upgrade
order. The upgrade data file can be applied to the dongle only one time and it
will work only with the dongle specified at the time you ordered the upgrade.
1.
If you received your upgrade files via email proceed to step 2. Otherwise,
insert the floppy disk or CD-ROM supplied with this kit into the appropriate
drive on your computer or Tektronix MPEG instrument.
2.
Copy the upgrade files from the floppy disk or CD-ROM, or from the email,
to any directory on your computer or Tektronix MPEG instrument.
Summary of Contents for MTS4EA
Page 18: ......
