Tektronix MSO54, Programmer'S Manual

Page: 878 / 1026

Commands listed in alphabetical order
NOTEQual
argument sets the oscilloscope to trigger if a runt pulse is detected with
width greater than or less than (but not equal to) the time period speci fi ed in
TRIGger:{A|B}:RUNT:WIDth within a ±5% tolerance.
Examples
TRIGger:A:RUNT:WHEn MORETHAN
sets the runt trigger to occur when the
oscilloscope detects a runt in a pulse wider than the speci fi ed width.
TRIGger:A:RUNT:WHEn?
might return
:TRIGGER:A:PULSE:RUNT:WHEN
OCCURS
indicating that a runt trigger will occur if the oscilloscope detects a runt
of any detectable width.
TRIGger:{A|B}:RUNT:WIDth
This command speci fi es the width, in seconds, for a runt trigger.
Group Trigger
Syntax
TRIGger:{A|B}:RUNT:WIDth <NR3>
TRIGger:{A|B}:RUNT:WIDth?
Related Commands
TRIGger:{A|B}:RUNT:WHEn
Arguments
<NR3>
is a fl oating point number that speci fi es the minimum width, in seconds.
Examples
TRIGger:A:RUNT:WIDth 15E-6
sets the minimum width of the pulse runt
trigger to 15 µs.
TRIGger:A:RUNT:WIDth?
might return
:TRIGGER:A:PULSE:RUNT:WIDTH
2.0000E-09
indicating that the minimum width of a pulse runt trigger is 2 ns.
TRIGger:{A|B}:SETHold:CLOCk:EDGE
This command speci fi es the clock edge polarity for setup and hold triggering.
Group Trigger
Syntax
TRIGger:{A|B}:SETHold:CLOCk:EDGE {FALL|RISe}
TRIGger:{A|B}:SETHold:CLOCk:EDGE?
2-862 MSO54, MSO56, MSO58, MSO58LP Programmer