Tektronix MSO54, Programmer'S Manual

Page: 850 / 1026

Commands listed in alphabetical order
TRIGger:{A|B}:BUS:B<x>:SPI:DATa:VALue
This command speci fi es the binary data string used for SPI triggering if the trigger
condition is DATA. The bus number is speci fi ed by <x>.
Conditions
Requires the SR-COMP Serial Triggering and Analysis Application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:SPI:DATa:VALue <QString>
TRIGger:{A|B}:BUS:B<x>:SPI:DATa:VALue?
Arguments
<QString>
speci fi es the data value in the speci fi ed valid format. The valid
characters are 0, 1, and X for binary format.
Examples
TRIGger:A:BUS:B1:SPI:DATa:VALue "11011010"
sets the data value to
11011010.
TRIGger:A:BUS:B1:SPI:DATa:VALue?
might return
:TRIGGER:A:BUS:B1:SPI:DATA:VALUE "XXXXXXXX"
indicating
the data value is XXXXXXXX.
TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:HIVALue
This command speci fi es the binary address string for the upper limit for
inside-of-range and outside-of-range quali fi ers for the USB trigger. Use the
command TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:VALue to set the lower
limit. The bus number is speci fi ed by <x>.
Conditions Requires the SR-USB2 Serial Triggering and Analysis Application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:HIVALue <QString>
TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:HIVALue?
Related Commands TRIGger:{A|B}:BUS:B<x>:USB:CONDition ,
TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:VALue
2-834 MSO54, MSO56, MSO58, MSO58LP Programmer