Tektronix MSO54, Programmer'S Manual

Page: 851 / 1026

Commands listed in alphabetical order
Arguments
<QString>
within the range 0000000 to 1111111 (00 hex to 7F hex).
Examples
TRIGGER:A:BUS:B1:USB:ADDRESS:HIVALUE "0001000"
sets the upper limit
to binary 0001000 (08 hex).
TRIGGER:A:BUS:B1:USB:ADDRESS:HIVALUE?
might return
:TRIGGER:A:BUS:B1:USB:ADDRESS:HIVALUE "1111111"
, which indicates
that the upper limit is 1111111 (7F hex).
TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:VALue
This command speci fi es the binary address string to be used for USB trigger.
The trigger condition must be set to TOKEN. The bus number is speci fi ed by <x>.
Conditions Requires the SR-USB2 Serial Triggering and Analysis Application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:VALue <QString>
TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:VALue?
Related Commands TRIGger:{A|B}:BUS:B<x>:USB:CONDition
Arguments
<QString>
within the range 0000000 to 1111111 (00 hex to 7F hex).
Examples
TRIGGER:A:BUS:B1:USB:ADDRESS:VALUE "0001000"
sets the binary
address to 0001000 (08 hex).
TRIGGER:A:BUS:B1:USB:ADDRESS:VALUE?
might return
:TRIGGER:A:BUS:B1:USB:ADDRESS:VALUE "1000000"
, which
indicates that the binary address is 100000 (40 hex).
TRIGger:{A|B}:BUS:B<x>:USB:CONDition
This command speci fi es the trigger condition for the USB trigger. The bus
number is speci fi ed by <x>.
Conditions Requires the SR-USB2 Serial Triggering and Analysis Application.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-835