Tektronix MSO54, Programmer'S Manual

Page: 435 / 1026

Commands listed in alphabetical order
Arguments
<NR3>
is the percentage (where 100% is equal to TOP) used to calculate the mid
reference level when the measurement Ref level method is set to Percent.
Examples
MEASUrement:MATH2REFLevels:PERCent:RISELow 5
sets the reference
level to 5% of TOP.
MEASUrement:MATH2REFLevels:PERCent:RISELow?
might return
:MEASUREMENT:MATH2:REFLEVELS:PERCENT:RISELOW 10.0000
indicating
the reference level is set to 10% of TOP.
MEASUrement:MATH<x>:REFLevels:PERCent:RISEMid
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the mid reference level of the rising edge
when the measurement ref level method is set to percent. The math number is
speci
fi ed by x.
Group Measurement
Syntax
MEASUrement:MATH<x>:REFLevels:PERCent:RISEMid <NR3>
MEASUrement:MATH<x>:REFLevels:PERCent:RISEMid?
Arguments
<NR3>
is the percentage (where 50% is equal to MID) used to calculate the mid
reference level when the measurement Ref level method is set to Percent.
Examples
MEASUrement:MATH2:REFLevels:PERCent:RISEMid 50
sets the reference
level to 50% of TOP.
MEASUrement:MATH2:REFLevels:PERCent:RISEMid?
might return
:MEASUREMENT:MATH2:REFLEVELS:PERCENT:RISEMID 50.0000
indicating
the reference level is set to 50% of TOP.
MEASUrement:MATH<x>:REFLevels:PERCent:TYPE
This command speci fi es or queries the reference level percent type for the
measurement. The math number is speci fi ed by x.
Group Measurement
Syntax
MEASUrement:MATH<x>:REFLevels:PERCent:TYPE
{TENNinety|TWENtyeighty|CUSTom}
MSO54, MSO56, MSO58, MSO58LP Programmer 2-419