Tektronix MSO54, Programmer'S Manual

Page: 321 / 1026

Commands listed in alphabetical order
Examples
DISplay:WAVEView1:MATH:MATH1:VERTical:POSition 0
sets the position
to 0 divisions.
DISplay:WAVEView1:MATH:MATH1:VERTical:POSition?
might return
:DISPLAY:WAVEVIEW1:MATH:MATH1:VERTICAL:POSITION -2.2800
indicating the position is at -2.28 divisions.
DISplay:WAVEView<x>:MATH:MATH<x>:VERTical:SCAle
Sets or queries the vertical scale of the speci fi ed math in volts per division within
the speci fi ed waveview.
NOTE.
WAVEView<x>
is the speci fi ed waveview and must be
WAVEView1
.
Group Display Control
Syntax
DISplay:WAVEView<x>:MATH:MATH<x>:VERTical:SCAle <NR3>
DISplay:WAVEView<x>:MATH:MATH<x>:VERTical:SCAle?
Arguments
<NR3>
is the vertical scale of the speci fi ed math waveform.
Examples
DISplay:WAVEView1:MATH:MATH1:VERTical:SCAle 400e-3
sets the scale
to 400 mV per division.
DISplay:WAVEView1:MATH:MATH1:VERTical:SCAle?
might return
:DISPLAY:WAVEVIEW1:MATH:MATH1:VERTICAL:SCALE 395.0000E-3
indicating the scale is 395 mV.
DISplay:WAVEView<x>:PLOT:PLOT<x>:AUTOScale
This command sets or queries whether the speci fi ed trend gets auto-scaled when
the new data is available within the speci fi ed waveview.
Group Display Control
Syntax
DISplay:WAVEView<x>:PLOT:PLOT<x>:AUTOScale {<NR1>|OFF|ON}
DISplay:WAVEView<x>:PLOT:PLOT<x>:AUTOScale?
Arguments
<NR1>
= 0 disables auto-scaling the speci fi ed plot in the speci fi ed waveview;
any other value turns this feature on.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-305