Commands listed in alphabetical order
Examples
DISplay:PLOTView1:CURSor:WAVEform:APOSition -50.0E-9
sets the
waveform
APOSITION
to -50.0 ns.
DISplay:PLOTView1:CURSor:WAVEform:APOSition?
might return
:DISPLAY:PLOTVIEW1:CURSOR:WAVEFORM:APOSITION -60.0796E-9
indicating the waveform
APOSITION
is set to -60.08 ns.
DISplay:PLOTView<x>:CURSor:WAVEform:BPOSition
This command sets or queries the waveform cursor B horizontal position of the
speci
fi
ed cursor in the speci
fi
ed view.
NOTE.
In case of XY plot, this command has no effect when used to set the value.
In case of bathtub plot, this command has no effect. Query returns invalid values.
For all other plots, this command sets or returns the cursor B horizontal position.
Group
Cursor
Syntax
DISplay:PLOTView<x>:CURSor:WAVEform:BPOSition <NR3>
DISplay:PLOTView<x>:CURSor:WAVEform:BPOSition?
Arguments
<NR3>
is the horizontal cursor B position.
Examples
DISplay:PLOTView1:CURSor:WAVEform:BPOSition 3.0
sets the position
to 3.0 V.
DISplay:PLOTView5:CURSor:WAVEform:BPOSition?
might return
:DISPLAY:PLOTVIEW5:CURSOR:WAVEFORM:BPOSITION 2.600517840
indicating the position is 2.5 V.
DISplay:PLOTView<x>:GRIDlines
This command sets or queries the Grid lines setting of the speci
fi
ed plot.
Group
Display Control
Syntax
DISplay:PLOTView<x>:GRIDlines {HORizontal|VERTical|BOTH}
DISplay:PLOTView<x>:GRIDlines?
MSO54, MSO56, MSO58, MSO58LP Programmer
2-259
Summary of Contents for MSO54
