Tektronix MSO54, Programmer'S Manual

Page: 264 / 1026

Commands listed in alphabetical order
CLEAR
resets the persist time count down and clears the display of acquired points.
Examples
DISPLAY:PERSISTENCE VARPERSIST
sets the persistence aspect of the display
to fade set pixels according to the time set in the DISplay:VARpersist command.
DISPLAY:PERSISTENCE?
might return
:DISPLAY:PERSISTENCE OFF
,
indicating that the persistence aspect of the display is disabled.
DISplay:PERSistence:RESET (No Query Form)
This command controls the clearing of persistence data that has been built up over
time. Persistence is valid for wave views only.
Group
Display Control
Syntax
DISplay:PERSistence:RESET
Related Commands DISplay:PERSistence , DISplay:VARpersist
Examples
DISPLAY:PERSISTENCE:RESET
clears the display of persistence data.
DISplay:PLOTView<x>:AUTOScale
This command sets or queries the enabled state of autoscale for plots.
Group Display Control
Syntax
DISplay:PLOTView<x>:AUTOScale {OFF|ON|<NR1>}
DISplay:PLOTView<x>:AUTOScale?
Arguments
OFF
disables the autoscale feature.
ON
enables the autoscale feature.
<NR1>
= 0 disables the autoscale feature; any other value enables the autoscale
feature.
2-248 MSO54, MSO56, MSO58, MSO58LP Programmer