Tektronix MSO54, Programmer'S Manual

Page: 297 / 1026

Commands listed in alphabetical order
DISplay:SELect:VIEW
This command sets or queries the selected view.
Group Display Control
Syntax
DISplay:SELect:VIEW
{WAVEVIEW1|MATHFFT<x>|PLOTVIEW<x>|REFFFT<x>}
Arguments
Arguments are the selected view.
Examples
DISplay:SELect:VIEW PLOTVIEW1
selects
PLOTVIEW1
as the selected view.
DISplay:SELect:VIEW?
might return
:DISPLAY:SELECT:VIEW MATHFFT1
indicating
MATHFFT1
is the selected view.
DISplay:SELect:WAVEView<x>:SOUrce
This command sets or queries the selected source in the given waveview.
Group Display Control
Syntax
DISplay:SELect:WAVEView<x>:SOUrce
{CH<x>|MATH<x>|BUS<x>|REF<x>|PLOT<x>}
Arguments
Arguments are the selected source.
Examples
DISplay:SELect:WAVEView1:SOUrce MATH1
sets
MATH1
as the selected
source.
DISplay:SELect:WAVEView1:SOUrce?
might return
:DISPLAY:SELECT:WAVEVIEW1:SOURCE CH2
indicating
CH2
is the
selected source.
DISplay:VARpersist
This command sets or queries display persistence decay time, which is the
approximate decay time for a freshly struck persistence sample.
Group
Display Control
MSO54, MSO56, MSO58, MSO58LP Programmer 2-281