Tektronix MSO54, Programmer'S Manual

Page: 176 / 1026

Commands listed in alphabetical order
BUS:B<x>:PARallel:ALLTHResholds:APPly (No Query Form)
This command sets all of the data source thresholds to the value set by
BUS:B<x>:PARallel:ALLTHResholds for the parallel bus. The bus is speci fi ed
by x.
Group Bus
Syntax
BUS:B<x>:PARallel:ALLTHResholds:APPly
Related Commands BUS:B<x>:PARallel:ALLTHResholds
Examples
BUS:B1:PARallel:ALLTHResholds:APPly
sets all data source thresholds to
the value set by BUS:B<x>:PARallel:ALLTHResholds .
BUS:B<x>:PARallel:BIT<n>SOUrce
This command sets or queries the speci fi ed bit source for speci fi ed parallel bus.
The bus is speci fi ed by x. The bit is speci fi ed by n and is an integer in the range of
1 to 64.
Group Bus
Syntax
BUS:B<x>:PARallel:BIT<n>SOUrce
{CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>|NONE}
Related Commands BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold
Arguments
CH<x>
is the speci fi ed bit source.
CH<x>_D<x>
is the speci fi ed bit source.
MATH<x>
is the speci fi ed bit source.
REF<x>
is the speci fi ed bit source.
REF<x>_D<x>
speci fi es a digital reference waveform as the bit<x> source
waveform for the speci fi ed parallel bus.
NONE
disables the bit source.
2-160 MSO54, MSO56, MSO58, MSO58LP Programmer