MSO44, MSO46 standard accessories
Item
Quantity
Tektronix part number
4 Series MSO (MSO44, MSO46) Installation and Safety Manual
1
071-3644-xx
TPP0250 Passive Voltage Probe (250 MHz bandwidth). Shipped with 200 MHz
models.
TPP0250
TPP0500B Passive Voltage Probe (500 MHz bandwidth). Shipped with 350 MHz
and 500 MHz models.
TPP0500B
TPP1000 Passive Voltage Probe (1 GHz bandwidth). Shipped with 1 GHz and 1.5
GHz models.
TPP1000
Accessory pouch
1
016-2143-xx
Power cord
1
Depends on region
Calibration certificate
1
N/A
Report of factory installed licenses
1
N/A
Safely rotate the handle
Use the correct process to eliminate the chance of pinching your thumb or rear-panel-connected cables while rotating the handle.
WARNING: Hold the top of the handle to rotate the handle on the instrument. Do not hold the handle from the sides and rotate, as
this can pinch the base of your thumb between the handle and the case.
CAUTION: If you have routed any cables between the handle and the case, be careful when rotating the handle so that you do
not pinch the cables.
Operating requirements
Use the instrument within the required operating temperature, power, altitude, and signal input voltage ranges to provide the most accurate
measurements and safe instrument operation.
Environment requirements
Characteristic
Description
Operating temperature
0 °C to +50 °C (+32 °F to +122 °F). For proper cooling, keep the sides of the instrument clear of
obstructions for 2 inches (51 mm).
Table continued…
1
Four probes are shipped with 4-channel models and six probes are shipped with 6-channel models.
Preface
14
