Tektronix MDO4000C Series, User Manual

Page: 78 / 160

Trigger Type Trigger Conditions
Rise/Fall Time Trigger on rise and fall times. Trigger on pulse
edges that traverse between two thresholds at
faster or slower rates than the specified time.
Specify pulse edges as positive or negative or
either.
Video Trigger on specified fields or lines of a
composite video signal. Only composite signal
formats are supported.
Trigger on NTSC, PAL, or SECAM. Works with
Macrovision signals.
With the DPO4VID module, trigger on a variety
of HDTV video standard signals, as well as
custom (non-standard) bilevel and trilevel video
signals with 3 to 4,000 lines.
Bus Trigger on various bus conditions.
I
2
C requires a DPO4EMBD module.
SPI requires a DPO4EMBD module.
CAN requires a DPO4AUTO or
DPO4AUTOMAX module.
RS-232, RS-422, RS-485, and UART require a
DPO4COMP module.
LIN requires either a DPO4AUTO or a
DPO4AUTOMAX module.
FlexRay requires a DPO4AUTOMAX module.
Audio requires a DPO4AUDIO module.
USB requires a DPO4USB module.
Ethernet requires a DPO4ENET module.
MIL-STD-1553 requires a DPO4AERO module.
See
Application module free trial on page 18.
Trigger setup
56 MDO4000C Series Oscilloscope User Manual
Preliminary