Tektronix MDO4000C Series, User Manual

Page: 26 / 160

Accessory Description Tektronix part number
FlexRay, CAN, and LIN serial
triggering and analysis
application module This module enables triggering
on packet level information in
FlexRay, CAN, and LIN buses.
Also, it provides digital views of
the signal, bus views, packet
decoding, search tools, packet
decode tables with time stamp
information and eye diagram
analysis software. DPO4AUTOMAX
Bundle application module This module enables
functionality for DPO4AERO,
DPO4AUDIO, DPO4AUTO,
DPO4COMP, DPO4EMBD,
DPO4ENET, DPO4LMT,
DPO4PWR, DPO4USB, and
DPO4VID DPO4BND
Computer triggering and
analysis application module This module enables triggering
on RS-232, RS-422,
RS-485 and UART serial buses.
Also, it provides digital views of
the signal, bus views, packet
decoding, search tools, and
packet decode tables with time
stamp information. DPO4COMP
Embedded serial triggering and
analysis application module This module enables triggering
on packet level information on
I
2
C and SPI serial buses. Also,
it provides digital views of the
signal, bus views, packet
decoding, search tools, and
packet decode tables with time
stamp information.
DPO4EMBD
Ethernet serial triggering and
analysis application module This module enables triggering
on 10BASE-T and 100BASE-
TX buses. Also, it provides
search tools, bus views, and
decode tables with time stamp
information.
NOTE. ≥350 MHz bandwidth
models are recommended for
100BASE-TX.
DPO4ENET
Installation
4 MDO4000C Series Oscilloscope User Manual
Preliminary