Configure the instrument
Set the date and time
Set the date and time so that saved files are marked with the correct date and time information.
1. Double-tap the Date/Time badge (bottom-right of screen) to open the configuration menu.
2. To turn off showing the date and time on the screen, tap the Display button to Off.
To turn on date/time display again, double-tap in the blank area where the date/time badge was displayed to open the
configuration menu and set the Display button to On.
3. You may also tap the Year, Day, Hour, Minute, or UTC Offset fields and use the multipurpose knobs to set the fields to the
correct time.
You may also double-tap the fields and use the numeric keypad to set the time.
4. Tap Month and select the month from the list.
5. Tap anywhere outside of the menu to close it.
MDO32, MDO34 Installation and Safety Manual
31
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
