Tektronix KEITHLEY 2200 Series, Programming Reference Manual

Page: 32 / 104

Commands Listed in Alphabetical Order
Group Instrument
Syntax
INSTrument:COMbine:OFF
Related Commands
INSTrument:COMbine?
Examples
INSTRUMENT:COMBINE:OFF
INSTrument:COMbine:PARAllel (No Query Form)
This command sets CH1 and CH2 into parallel mode. This mode assumes that
CH1 and CH2 have been wired in parallel external to the power supply. The
combined channel should be referred to as CH1 and the current for the combined
channel may be set as high as 3A. Voltage will be set to the same value for both
channels. The
measure:current
command will respond with the combined
current.
Group Channel
Syntax
INSTrument:COMbine:PARAllel
Related Commands INSTrument:COMbine:OFF , INSTrument:COMbine:SERies , INSTrument:
COMbine:TRACk ,
Examples
INSTRUMENT:COMBINE:PARALLEL
INSTrument:COMbine:SERies (No Query Form)
This command sets CH1 and CH2 into series mode. This mode assumes that CH1
and CH2 have been wired in series external to the power supply. The combined
channel should be referred to as CH1 and the voltage for the combined channel
may be set as high as 60 V. The current limit will be set to the same value for both
channels. The
measure:voltage
command will respond with the combined
voltage.
Group Channel
Syntax
INSTrument:COMbine:SERies
2-18 Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual