Tektronix IsoVu TIVM Series, User Manual

Page: 36 / 82

Operating information
For example, the IVTIP5X tip has a dynamic range of 5 V
p-p
when the 1X Range
is selected. This means that you can display a signal with a ±2.5 V differential
voltage. When the 2X Range is selected, the dynamic range increases from 5 V
p-p
to 10 V
p-p
(±5.0 V). Refer to the Linear differential input voltage range in the
speci fi cations table for more information.
CAUTION.
To avoid damaging the probe, do NOT exceed either the RMS OR
Peak Voltage ratings. The Maximum Non-Destruct Voltage limits (RMS and Peak
Voltage) do not increase when the 2X Range is selected. For the IVTIP5X, the
12 V
rms
and ±21.5 V
pk
limits are the same for the 1X or 2X Range.
Auto Range
By default, the MSO/DPO5000, DPO7000, and MSO/DPO70000 Series
Oscilloscopes select the 1X or 2X Range automatically when you change the
V/div setting. This hides the complexity of selecting the range from casual users.
However, there are combinations of Range and V/div settings that cannot be
reached when Auto Range is selected. For these situations, select Manual Range
when full
fl exibility is desired.
18 TIVM Series Measurement System User Manual