Tektronix IBP420, Hardware Installation And Maintenance Manual

Page: 14 / 50

Iris Packet Broker (IPB) 7.13.2 12
Hardware Installation and Maintenance Guide
2
IPB Hardware Reference Rev. 001-140228
IPB220
AND
IPB420 C
HASSIS
LED
S
The front of the IPB chassis provides several LEDs (
Figure 2.3
).
Figure 2.3 - IPB Chassis LEDs
Table 2.4
describes the IPB chassis LEDs.
Console Port RJ45 connector supporting serial RS-232. Not used during normal probe
operation.
Fan Tray Each hot-swappable fan tray provides six fans for platform for cooling.
Power Supplies Two redundant hot-swappable power supplies. The P1 and P2 LEDs on the
front of the chassis indicate the power status.
Refer to IPB Power and Heat Specifications for details.
Table 2.3 - IPB Rear Panel Component Descriptions (Continued)
Item Description
Table 2.4 - IPB Chassis LEDs
LED Description
Flag OFF Normal operation.
YELLOW Traffic overflow condition.
Error OFF Normal operation.
Solid RED Hardware alert, such as missing power supply.
Blinking RED Hardware condition needs immediate attention.
P1 and P2 OFF No power present.
Solid GREEN Power on mode. Power supply outputs are on and
power feed is good.
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited