Tektronix HDVG1, Service Manual

Page: 29 / 106

Installation
HDVG1 HDTV Digital Video Generator Service Manual
2- 5
Figure 2- 5: Installing the module
7. Ensure that the connectors on the Backplane board and the module exactly
match before seating the module.
CAUTION.
The connectors must exactly match before you attempt to press the
module firmly in place. If the connectors do not match you could bend a pin that
could damage the module, mainframe, or both when power is applied.
8.
Press down evenly on the module until it is firmly in place.
9.
Refer to Figure 2--6 and insert and tighten the top screw, which comes with
your module, and tighten the rear panel screw.