Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to
fi
nd contacts in your
area.
Using the HCTEK54 with MSO5000 and DPO5000 Series
Oscilloscopes
1.
Open the transit case by unsnapping the four latches.
2.
Fold the oscilloscope handle down.
3.
With the oscilloscope pouch facing forward, place the
oscilloscope into the transit case.
4.
Close the transit case and snap the four latches closed.
5.
To secure the transit case, fasten a lock through the
security rings.
6.
If the instrument is to be transported via aircraft, open
the air pressure control valve to allow for pressure
equalization.
Using the HCTEK54 with MSO4000B and DPO4000B Series
Oscilloscopes
1.
Open the transit case by unsnapping the four latches.
2.
Remove the foam piece from the transit case.
3.
With the oscilloscope handle in its up-right position, place
the oscilloscope into its soft case.
NOTE.
The soft case (ACD4000B) is a required component of
this system, and must be purchased separately.
4.
Place the oscilloscope (and soft case) into the transit case.
5.
Close the transit case and snap the four latches closed.
6.
To secure the transit case, fasten a lock through the
security rings.
7.
If the instrument is to be transported via aircraft, open
the air pressure control valve to allow for pressure
equalization.
Copyright © Tektronix, Inc. All rights reserved.
www.tektronix.com
