HCTEK4321 Transit Case
Soft
case
Oscilloscope
Installation procedure
AC220
TDS200
Do not remove any foam insert. See Figure 1 (B).
TDS1000,
TDS1000B,
TDS1000C-EDU,
TDS2000,
TDS2000B,
TDS2000C
Remove the side foam inserts from the inner foam ring. See Figure 2 (A).
AC2100
TPS2000, TPS2000B
Remove the inner ring of foam inserts. See Figure 2 (B).
ACD2000
DPO2000, MSO2000
Remove the two inner foam inserts. See Figure 2 (C).
AC3000
TDS3000,
TDS3000B,
TDS3000C
Remove the two inner foam inserts. See Figure 1 (C).
DPO3000, MSO3000
Leave the foam inserts in the soft case and remove all foam inserts from the transit case.
See Figure 3 (B).
ACD4000
DPO4000, MSO4000
Remove all foam inserts. See Figure 3 (A).
4.
Place the relevant soft case and oscilloscope in the HCTEK4321 transit case.
5.
Close the case and snap the four latches closed. See Figure 1 (A).
6.
To secure the case, fasten a lock through the security rings.
7.
If the instrument is to be transported via aircraft, open the air pressure control
valve to allow for pressure equalization.
2
HCTEK4321 Transit Case Instructions