Command Descriptions
Syntax
*RMC '<Macro name>'
Related Commands
, if you want to delete all macros.
Arguments
<MACRO NAME>
is the name of the macro you want to delete.
NOTE.
<MACRO NAME>
is String data that must be surrounded by quotation
marks.
ROSCillator:SOURce
Selects the signal from the external reference input as timebase instead of the
internal timebase oscillator. If the parameter is set to the default value AUTO, the
instrument uses the external reference signal if present.
Group
Sense
Syntax
ROSCillator:SOURce {INT|EXT|AUTO}
ROSCillator:SOURce?
Returns
<INT|EXT|AUTO>
*RST (No Query Form)
The Reset command resets the instrument. It is the third level of reset in a 3-level
reset strategy, and it primarily affects the instrument functions, not the IEEE 488
bus. (See page C-1,
Instrument Settings After *RST
All previous commands are discarded, macros are disabled, and the instrument is
prepared to start new operations.
Group
Common
Syntax
*RST
Examples
*RST
2-98
FCA3000, FCA3100, MCA3000 Series Programmer Manual
Summary of Contents for FCA3000 Series
