Commands Listed in Alphabetical Order
Arguments
Arguments are ignored.
Examples
WFMOUTPRE:PT_OFF?
might return
WFMOUTPRE:PT_OFF 0
indicating that the
waveform speci
fi
ed by
DATA:SOURCE
is on or displayed.
WFMOutpre:PT_ORder? (Query Only)
This query is for compatibility with other Tektronix oscilloscopes and always
returns LINEAR.
Group
Waveform Transfer
Syntax
WFMOutpre:PT_ORder?
Related Commands
Examples
WFMOUTPRE:PT_ORDER?
returns
:WFMOUTPRE:PT_ORDER LINEAR
.
WFMOutpre:WFId? (Query Only)
Returns a string describing several aspects of the acquisition parameters for the
waveform speci
fi
ed by the
command. The query command will
time out and an error will be generated if the waveform speci
fi
ed by
is not turned on.
Group
Waveform Transfer
Syntax
WFMOutpre:WFId?
Related Commands
Returns
<QString>
comprises the following comma-separated
fi
elds documented in
the tables below:
2-524
MSO4000 and DPO4000 Series Programmer Manual
Summary of Contents for DPO4000 Series
