Commands Listed in Alphabetical Order
Examples
WFMINPRE:BN_FMT RP
speci
fi
es positive integer data point representation.
WFMINPRE:BN_FMT?
might return
:WFMINPRE:BN_FMT RI
indicating that the
incoming data is currently interpreted as signed integers.
WFMInpre:BYT_Nr
Sets or returns the data width for the incoming waveform. Changing the value of
also changes the value of
.
Group
Waveform Transfer
Syntax
WFMInpre:BYT_Nr <NR1>
WFMInpre:BYT_Nr?
Related Commands
Arguments
<NR1>
is the number of bytes per data point and can be 1 or 2.
Examples
WFMINPRE:BYT_NR 1
sets the number of bytes per incoming waveform data
point to 1, which is the default setting.
WFMINPRE:BYT_NR?
might return
:WFMINPRE:BYT_NR 2
indicating that there
are 2 bytes per incoming waveform data point.
WFMInpre:BYT_Or
Sets or returns which byte of binary waveform data is expected
fi
rst for incoming
waveform data when data points require than one byte. This speci
fi
cation only has
meaning when
is set to BIN and
is 2.
Group
Waveform Transfer
Syntax
WFMInpre:BYT_Or {LSB|MSB}
WFMInpre:BYT_Or?
Related Commands
MSO4000 and DPO4000 Series Programmer Manual
2-511
Summary of Contents for DPO4000 Series
