Commands Listed in Alphabetical Order
Arguments
ODD
argument sets the oscilloscope to trigger on interlaced video odd
fi
elds.
EVEN
argument sets the oscilloscope to trigger on interlaced video even
fi
elds.
ALLFields
argument sets the oscilloscope to trigger on all
fi
elds.
ALLLines
argument sets the oscilloscope to trigger on all video lines.
NUMERic
argument sets the oscilloscope to trigger on the video signal line
speci
fi
ed by the
command.
Examples
TRIGGER:A:VIDEO:FIELD EVEN
sets the A video trigger so that it will trigger
on even
fi
elds.
TRIGGER:A:VIDEO:FIELD?
might return
:TRIGGER:A:VIDEO:FIELD
ALLFIELDS
indicating that the A video will trigger on all video
fi
elds.
TRIGger:B
Sets the B trigger level to 50% of minimum and maximum. The query form
of this command returns the B trigger parameters. This command is similar to
selecting B Event (Delayed) Trigger Setup from the Trig menu and then viewing
the current setups.
Group
Trigger
Syntax
TRIGger:B SETLevel
TRIGger:B?
Related Commands
Arguments
SETLevel
sets the B trigger level to 50% of MIN and MAX.
Examples
TRIGGER:B SETLEVEL
sets the B trigger level to 50% of MIN and MAX.
TRIGGER:B?
might return the following B trigger parameters:
:TRIGGER:B:STATE 0;TYPE EDGE; LEVEL -220.0000E-3;BY
TIME;EDGE:SOURCE CH1;SLOPE RISE;COUPLING DC; :TRIGGER:B:TIME
16.0000E-9;EVENTS:COUNT 2
TRIGger:B:BY
Selects or returns whether the B trigger occurs after a speci
fi
ed number of events
or a speci
fi
ed period of time after the A trigger.
2-494
MSO4000 and DPO4000 Series Programmer Manual
Summary of Contents for DPO4000 Series
