Commands Listed in Alphabetical Order
*TRG (No Query Form)
Performs a group execute trigger on commands de
fi
ned by *DDT.
Group
Miscellaneous
Syntax
*TRG
Related Commands
Examples
*TRG
immediately executes all commands that have been de
fi
ned by *DDT.
TRIGger (No Query Form)
Forces a trigger event to occur.
Group
Trigger
Syntax
TRIGger FORCe
TRIGger?
Arguments
FORCe
creates a trigger event. If TRIGger:STATE is set to READy, the acquisition
will complete. Otherwise, this command will be ignored.
Examples
TRIGGER FORCE
forces a trigger event to occur.
TRIGger:A
Sets the A trigger level automatically to 50% of the range of the minimum and
maximum values of the trigger input signal. The query returns current A trigger
parameters. The trigger level is the voltage threshold through which the trigger
source signal must pass to generate a trigger event. This command works for the
following cases: Edge Trigger (when source is Not Line), Logic Trigger (when
Clock Source is not Off or Logic Pattern is Don’t Care), and Pulse Width Trigger.
Group
Trigger
2-414
MSO4000 and DPO4000 Series Programmer Manual
Summary of Contents for DPO4000 Series
