Commands Listed in Alphabetical Order
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:CONDition
Sets or returns the trigger condition for the USB search.
Conditions
This command requires the DPO4USB application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:CONDition
{SYNC|RESET|SUSPEND|RESUME|EOP|TOKENPacket|DATAPacket
|HANDSHAKEPacket|SPECIALPacket|ERRor}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:CONDition?
Arguments
SYNC
indicates triggering on a Sync
fi
eld of a packet.
RESET
sets triggering on a reset condition.
SUSPEND
sets triggering on a suspend condition.
RESUME
sets triggering on a resume condition.
EOP
indicates triggering on an end-of-packet signal.
TOKENPacket
indicates triggering on a token packet.
DATAPacket
indicates triggering on a data packet
HANDSHAKEPacket
indicates triggering on a handshake packet.
SPECIALPacket
indicates triggering on a special status packet.
ERRor
indicates triggering on an error condition.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:CONDITION TOKENPACKET
sets
the trigger condition to be a token packet.
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:CONDITION?
might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:CONDITION SYNC
, which
indicates that the trigger condition is a sync
fi
eld.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:DATa:HIVALue
Sets or returns the binary data string for the upper limit for inside-of-range
and outside-of-range quali
fi
ers for the USB search trigger when trigger search
condition is DATAPacket. Use the command
to set the lower limit.
MSO4000 and DPO4000 Series Programmer Manual
2-375
Summary of Contents for DPO4000 Series
