Tektronix DPO3000 Series, User Manual

Page: 139 / 302

Trigger Setup
6. Push Trigger On and turn multipurpose knob
a to scroll through the side-bezel menu until
you select the desired trigger on feature.
If you are using the I
2 C bus trigger, you
can trigger on Start , Repeated Start ,
Stop , Missing Ack , Address , Data , or
Address/Data .
If you are using the SPI bus trigger, you can
trigger on
SS Active , MOSI , MISO , or MOSI
& MISO .
If you are using the CAN bus trigger, you can
trigger on
Start of Frame , Type of Frame ,
Identi fi er , Data , Id & Data , End of Frame ,
and Missing Ack .
If you are using the RS-232 bus trigger, you
can trigger on
Tx Start Bit , Rx Start Bit , Tx
End of Packet , Rx End of Packet , Tx Data ,
or Rx Data .
If you are using the LIN bus trigger, you
can trigger on
Sync , Identi fi er , Data , Id &
Data , Wakeup Frame , Sleep Frame , or Error .
DPO3000 Series Oscilloscopes User Manual 123