Home
/
Tektronix
/
DPO2304SX
/
Printable Help

Tektronix DPO2304SX, Printable Help, Page: 787 / 920

Share

Page: 787 / 920

Tektronix DPO2304SX Printable Help Download Page 787

Behavior.

■

Vectors displays waveforms with lines drawn between record points.

■

Dots displays waveform record points as dots on the screen. Dots are useful when you want to display multivalued
waveforms such as eye diagrams.

■

Inten Samp (Intensified Samples) shows only the actual samples. When you use intensified samples, you identify the actual
sample points in an interpolated waveform.

You can also use the Display menu Display Style submenu to directly access the style options.

NOTE. The Vectors and Inten Samp selections are not available when using the XY or XYZ Display Formats.

What do you want to do next?

Learn about changing the display colors.

Learn about using text with screen displays.

Learn about changing the appearance of objects in the display.

Eye diagram

The eye diagram is a synchronized display of a data stream that shows signal levels and transition regions, typically over one
cycle.

The eye diagram has the appearance of an opened eye. Compared to a normal instrument display, the eye diagram generally
appears as an untriggered waveform. This is because on successive cycles the signal is high and then low. The areas of interest
are the transition regions and eye opening.

Select the math color

From the Display menu, select Colors, or open the Colors tab in the Display control window.

To use. Click one of the buttons to select the color scheme for math waveforms.

■

Click Default to use the default system color for the selected math waveform.

■

Click Inherit to use the same color as the waveform the reference function is based on.

What do you want to do next?

Learn about changing the overall display appearance.

Learn about changing the appearance of objects in the display.

Learn about using text with screen displays.

Oscilloscope reference

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

755

«
...
785
786
787
788
789
...
»

Summary of Contents for DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments