Tektronix DPO2304SX Printable Help Download Page 203

Page: 203 / 920

Trigger T marker

Display control window (Colors tab)

From the Display menu, select Colors, or open the Colors tab in the Display control window.

Overview

Use the controls on the Colors tab to change waveform color palettes. You can define colors for the live, math, and reference
waveforms.

If you are using Waveform Database acquisition mode, select the FastAcq/WfmDB Palette. For all other acquisition modes, use
the Record View Palette.

For information on the controls, click the buttons.

■

Palette

■

Reference Color

■

Math Color

What do you want to do next?

Learn about changing the overall display appearance.

Learn about changing the appearance of objects in the display.

Display setups

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

171

Summary of Contents for DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DPO2304SX

Reviews:

Tektronix DPO2304SX, Printable Help, Page: 203 / 920

Search results

Summary of Contents for DPO2304SX

Reviews: