Tektronix DPO2304SX, Printable Help

Page: 54 / 920

Working with your Tektronix oscilloscope
Windows environment
Windows interface guidelines. Because the instrument uses the Microsoft Windows interface, you have open access to the
Windows operating system. You can access the Windows desktop to load and run other Windows-based applications such as
Microsoft Excel, WordPad, and Paint.
Although you have access to the Windows interface, you should avoid making operating system changes that may cause
problems or annoyances while trying to use the instrument. Here are some guidelines:
■ The instrument has been tested with the version of Microsoft Windows provided and is not intended to operate with any
other versions.
■ If the instrument powers on in Windows Safe Mode, the touch screen is inoperative. You may need to use a mouse or
keyboard to restore normal operation.
■ To keep the start-up time to a minimum, keep the network support to a minimum.
■ Be careful when making changes in the Control Panel. Avoid making changes to any controls with which you are unfamiliar.
■ Do not change the LCD color quality (Highest 32 bit) and screen resolution settings (1024 by 768 pixels) or the video port
may not work properly.
■ Some third-party applications may not work properly with the instrument. If your instrument stops working after you install
third-party software, try reloading the instrument software.
■ If you do not have an external monitor attached to the instrument, avoid changing the taskbar properties to "Always on top"
and "Auto hide." The Windows taskbar may obscure buttons or readouts on the screen. However, if you do have an external
monitor attached and the instrument is set to dual monitor mode, you can drag the taskbar from the instrument display to the
external monitor display and use these settings.
■ Disable the Windows screen saver to prevent it from turning on while you are taking measurements or viewing the display. If
the screen saver comes on while taking measurements, touch the screen (if the touch screen is installed and enabled),
move the mouse, or press any key on the attached keyboard.
■ Do not delete or change any system fonts. Changing, removing, or resizing fonts may affect the quality of the display and
corrupt the TekScope buttons and menus.
■ Avoid personalizing or changing the system Display Properties, such as the theme, Background, Appearance, Effects, or
Settings. Making such changes can affect the usability of the instrument and the touch screen.
■ Avoid making changes to the contents of the Windows folder or to the contents of the TekScope folder.
■ Avoid making changes to the BIOS settings. Changing the BIOS settings can affect the overall operation of the instrument.
■ Avoid changing the Windows power management system.
If you think that your Windows interface may cause problems with the instrument, contact your local Tektronix support center for
assistance.
About Tektronix oscilloscopes
22 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series