![background image](http://html1.mh-extra.com/html/tektronix/c-30b/c-30b_instruction-manual_1077700013.webp)
Operating Instructions—C-30B Camera
PREPARATION FOR USE
MOUNTING THE CAMERA
The follow ing mounting instructions are applicable for
attaching the C-30B Camera and adapter to TEKTRO NIX
422, 450-series (except 455), 485, and 491 instruments.
Various mounting adapters are available for other Tek
tro n ix instruments and may be ordered as required. Data
Sheets provided w ith other camera adapters contain
appropriate mounting information.
Light Seal Replacement
The C-30B Camera is shipped w ith the 8- by 10-division
light seal installed in the mounting adapter. If a 6- by 10-
division light seal is required, unscrew and remove the
rubber fo o t from the mounting adapter (see Figure 2-2).
Remove the 8- by 10-division light seal and replace it with
the 6- by 10-division light seal. Reinstall the rubber fo ot to
secure the light seal in place. For most photographic
work, any mesh filte r or colored light filte r should be
removed from the instrument.
Camera Mounting
The camera with attached adapter can be mounted to
the instrument by sliding it onto the flange of the crt bezel.
To remove the assembly, slide it up and o ff of the flange of
the crt bezel.
Figure 2-2. Mounting the camera and inserting the light seal.
2-3
Summary of Contents for C-30B
