Clear and Sanitize Procedures
AWG5000 Series Declassification and Security
3
To Disable LAN Ethernet
Connectivity Using the
BIOS
1.
Press F2 during instrument Boot Up to go to the BIOS configuration menu.
2.
Go to Advanced > Peripheral Configuration.
3.
Set Onboard LAN to Disabled.
4.
Press Esc one time to return to the main BIOS configuration menu.
5.
Press F10, and select OK to save changes and exit. The LAN system will be
disabled and no longer allow data traffic in or out.
To Disable TekLink Using
the Windows Device
Manager
1.
Connect a PS2 mouse and a PS2 keyboard to the instrument before powering
on (because USB will be disabled).
2.
Log on to the instrument as an administrator.
3.
From the Windows Start menu, select Control Panel, and then select System.
4.
Select the Hardware tab.
5.
Click Device Manager.
6.
Expand the device category Network Adapters.
7.
Double click on the Intel(R) PRO/100 M Network Connection. This will be the
Network Adapter located on the interface board in PCI slot 2.
8.
Click the General tab, and select Do not use this device (disable) in the Device
Usage drop-down list.
To Disable GPIB Using the
Windows Device Manager
1.
Connect a PS2 mouse and a PS2 keyboard to the instrument before powering
on (because USB will be disabled).
2.
Log on to the instrument as an administrator.
3.
From the Windows Start menu, select Control Panel, and then select System.
4.
Select the Hardware tab.
5.
Click Device Manager.
6.
Expand the device category National Instruments GPIB Interfaces.
7.
Right click on PCI-GPIB.
8.
Select Disable from the list.
