Tektronix AWG-HD, Installation And Safety Instructions

Page: 13 / 83

Install the AWG-HD into a system
e. Send an *IDN? query to ensure the device responds. If communication is
established correctly, the device should respond with its information in
the Command/Data
fi eld.
If the instrument does not appear in the Instruments, it may need to cycle
power one or twice before its host name appears. Allow at least 30
seconds after power on for the instrument to be identi
fi able.
If you have problems discovering the instrument with OpenChoice, you
can use the TekExpress HDMI option to identify the instrument.
NOTE.
The AWG-HD has a fallback IP address in case normal connection
through its host name fail. If the AWG-HD is connected directly to a host PC
via Ethernet (Link-Local) without the use of a network using DHCP, it will use
an IP address of 192.168.1.10.
6. Set up all of the instruments using Instrument Control Settings in TekExpress.
This completes the hardware setup for the HDMI test system.
7. See the TekExpress Help to complete the software setup.
AWG-HD Installation and Safety Instructions 7