AFG31000 Series Arbitrary Function Generator Specification and Performance Verification Technical Reference
ix
This manual contains information and warnings that must be followed by the user for safe operation
and to keep the product in a safe condition.
To safely perform service on this product, additional information is provided at the end of this section.
See
(on page 11).
General safety summary
Use the product only as specified. Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. Carefully read all instructions. Retain these
instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow generally accepted safety
procedures in addition to the safety precautions specified in this manual.
The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove the cover for repair,
maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is operating correctly.
This product is not intended for detection of hazardous voltages.
Use personal protective equipment to prevent shock and arc blast injury where hazardous live
conductors are exposed.
While using this product, you may need to access other parts of a larger system. Read the safety
sections of the other component manuals for warnings and cautions related to operating the system.
When incorporating this equipment into a system, the safety of that system is the responsibility of the
assembler of the system.
To avoid fire or personal injury
Use proper power cord.
Use only the power cord specified for this product and certified for the
country of use.
Do not use the provided power cord for other products.
Use proper voltage setting.
Before applying power, make sure that the line selector is in the proper
position for the source being used or make sure the line voltage is corrected based on the published
specifications.
Ground the product.
This product is grounded through the grounding conductor of the power cord.
To avoid electric shock, the grounding conductor must be connected to earth ground. Before making
connections to the input or output terminals of the product, make sure that the product is properly
grounded.
Important safety information
