Pollution degree
Pollution Degree 2 (as defined in IEC 61010-1). Note: Rated for
indoor, dry location use only.
IP rating
IP20 (as defined in IEC 60529).
Measurement and overvoltage category descriptions
Measurement terminals on this product may be rated for measuring
mains voltages from one or more of the following categories (see
specific ratings marked on the product and in the manual).
■
Measurement Category II. For measurements performed on
circuits directly connected to the low-voltage installation.
■
Measurement Category III. For measurements performed in the
building installation.
■
Measurement Category IV. For measurements performed at the
source of low-voltage installation.
NOTE.
Only mains power supply circuits have an overvoltage category
rating. Only measurement circuits have a measurement category
rating. Other circuits within the product do not have either rating.
Environmental compliance
This section provides information about the environmental impact of
the product.
Product end-of-life handling
Observe the following guidelines when recycling an instrument or
component:
Compliance information
A622 Instructions
xiii
