Specifications
50
80E07, 80E08, 80E09, and 80E10 User Manual
Table 5: Electrical sampling modules - Signal acquisition (cont.)
Specifications
Characteristics
Vertical sensitivity range
3
The range of available full scale input settings.
Maximum
1 mV per division (10 mV full screen)
Minimum
100 mV per division (1 V full screen)
Vertical offset range
1
±
1.1 V
Compensation
temperature range
±
5
_
C about temperature where compensation was
performed.
If the module is moved to another compartment on the
mainframe, the channel(s) must be recompensated.
n
DC voltage
accuracy, single point,
compensated
The sampling module and mainframe together as a system
shall meet or exceed the following DC accuracy requirements
after compensation has taken place. For operation over
10--40
_
C, a temperature tolerance of
±
2
_
C guaranteed
(
±
5
_
C typical) relative to the compensation temperature, is
permitted. If sampling module is moved to a different
compartment or mainframe, re-compensation must be done.
±
2 mV <system offset offset>
±
0.007 * (assigned offset) <system offset gain>
±
0.02 * (vertical value -- assigned offset) <system
gain/offset>
System deviation from linear least squares fit, at the
maximum bandwidth setting:
±
10 mV
n
Analog bandwidth, maximum
frequency setting
80E07
DC to 30 GHz, better than
±
3 dB
80E08
DC to 30 GHz, better than
±
3 dB
80E09
DC to 60 GHz, better than
±
3 dB
80E10
DC to 50 GHz, better than
±
3 dB
Analog bandwidth, reduced
frequency set points, typical
80E07, 80E08
20 GHz
80E09, 80E10
40 GHz, 30 GHz
Rise time, typical
Estimated based upon assumed 0.35 calculated product of
typical bandwidth and risetime
60 / 50 GHz
40 GHz
30 GHz
20 GHz
80E07
----
----
11.67 ps
17.5 ps
80E08
----
----
11.67 ps
17.5 ps
80E09
5.83 ps
8.75 ps
11.67 ps
----
80E10
7 ps
8.75 ps
11.67 ps
----
Summary of Contents for 80E07
