Locate User Documentation for Modules
H
Module documentation in Adobe PDF format is located on the main instrument product documentation CD-ROM.
H
You can purchase printed copies of manuals by contacting Tektronix or from the Tektronix Web site.
H
To download the most recent versions of manuals from the Tektronix Web site, select the manuals link under the
myTek Resource Center heading, and then search for the partial Tektronix part numbers listed in the following table:
Search for
Products covered
1
Search for
Products covered
071-0435-xx
80C00 Series Optical Sampling Modules
071-1317-xx
80A02 EOS/ESD Protection Module
071-0434-xx
80E01, 80E02, 80E03, 80E04, and
80E06 Electrical Sampling Modules
071-1298-xx
80A03 TekConnect
E
Probe Interface
071-2038-xx
80E07, 80E08, 80E09, and 80E10
Electrical Sampling Remote Modules
071-1467-xx
80A05 Electrical Clock Recovery Module
071-0873-xx
80A01 Pre-Scaled Trigger Amplifier
071-1744-xx
80A06 PatternSync Module
1
The 82A04 Phase Reference module is documented in the main instrument online help and the Specifications and Performance
Verification manual.
Ensure Software Compatibility
1.
Ensure that your product software version is appropriate for the version of Microsoft Windows loaded on your
mainframe.
H
Find your software version by selecting
About
in the mainframe Help menu.
H
Visit the Tektronix Web site for upgrades and information. From the Oscilloscopes page, select the Sampling link
for product information. From the Sampling Oscilloscopes page, select Download Software for software updates.
2.
Use the following table to find the product software version required for your module. Each new version supports all of
the modules supported by earlier versions.
Product software New modules supported
Operating system
1
Version 1.0
80C01, 80C01-CR, 80C02/-CR, 80C03/-CR, 80E01, 80E02, 80E03, 80E04,
80A01, 80A02
Requires Microsoft
Windows 98
Version 1.1
80C04/-CR1
Version 1.2
80C04-CR2, 80C05, 80C06
Version 1.3
80C07/-CR1, 80C08/-CR1, 80C09/-CR1, 80A03
Version 1.4
80C08B/-CR1-CR2, 80C10, 80E06
Version 1.5
80C07B/-CR1, 80C08C/-CR1/-CR2/-CR4, 80C11/-CR1/-CR2/-CR3/-CR4
Version 2.0.1.3
2
80C12 (limited), 80A05 (limited)
Requires Microsoft
Wi d
Version 2.0.1.5
80C12, 80A05
q
Windows 2000
Version 2.1
82A04 (Must be installed in a DSA8200, CSA8200, or TDS8200 mainframe)
Version 2.4
80A06
Version 2.5
80E07, 80E08, 80E09, 80E10
3
Version 5.0
80C10B, 80C02 Option 01, 80C08C Option 01, 80C11 Option 01,
80C12 Option 01
Requires Microsoft
Windows XP
1
Contact Tektronix for operating system upgrade information.
2
Replace product application software version 2.0.1.3 with the latest available version.
3
Using the 80E07, 80E08, 80E09, or 80E10 modules in mainframes with older versions of product software may cause the application to
fail to start.
