Tektronix 77807-1, User Manual

Page: 80 / 132

Appendix B: Remote Control
DS1000 Series User Manual
B–17
CHANNEL
Sets or requests the selected channel record number and frequency
table of the television demodulator. Sending the CHANNEL=
command automatically sets the tuning mode to CHANNEL. The
television demodulator must be in the remote state to use this
command. For the query command, set TUNING to mode 0.
CHANNEL=<table><channel_rec>
CHANNEL?
Byte
offset Argu-
ment
Description
1 <table> Selects the table of channels from one of the following:
NTSC:
0: User defined table
1:
CATV HRC
2: CATV IRC
3: CATV STD
4: STDOFST
5: IRC
6: HRC
7: B’CAST
PAL:
0: User defined table
1:
UHF EUROPA
2: UHF CHINA
3: VHF EUROPA
4: VHF FRANCE
5: VHF ITALY
6: VHF AUSTRALIA
7: VHF CHINA
8: VHF IRELAND
9: VHF N. ZEALAND
10: VHF S. AFRICA
11: VHF OIRT
12: VHF CCIR
2 <chan-
nel_rec> Selects the record number in the selected table. The
table record number corresponds to a particular channel
number. Refer to Appendix D for the record number
associated with each channel number in the selected
table.
Syntax
Arguments
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com