Tektronix 6 series, Printable Help

Page: 222 / 518

Other bus types. Other serial bus types, such as CAN, LIN, Ethernet, and so on, are available as purchasable options. Once
purchased and installed, the new bus types are shown in the Bus Type menu. The serial bus options also add corresponding bus
trigger capabilities to the Trigger menu.
ARINC 429 serial bus menu on page 192
Audio serial bus configuration menu on page 194
CAN serial bus configuration menu on page 196
Ethernet serial bus menu on page 198
I2C serial bus configuration menu on page 202
LIN serial bus configuration menu on page 204
MIL-STD-1553 serial bus menu on page 205
Parallel Bus configuration menu on page 207
RS232 serial bus menu on page 209
SENT serial bus configuration menu on page 211
SPI serial bus configuration menu on page 213
SPMI serial bus configuration menu on page 215
USB serial bus configuration menu on page 217
See also.
Bus Trigger configuration on page 342
Bus Search configuration menus on page 230
I2C serial bus configuration menu
Use the I2C bus menu (optional) to set up and display an I
2
C (Inter-Integrated Circuit) serial bus waveform.
To set up the I
2
C serial bus menu:
■
To create a new I
2
C bus waveform, tap the Add New Bus button on the Settings bar. Open the bus configuration menu by
double clicking on the badge. Set the Bus Type to I2C.
■
To change the settings on an existing I
2
C serial bus waveform, double-tap the I
2
C Bus waveform badge and make
necessary changes in the configuration menu.
Menus and dialog boxes
202 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help