manualshive.com logo in svg

Tektronix 3 Series, Printable Help

Introducing the Huawei 3 Series user manual, your essential guide to unlocking the full potential of your device. Download this comprehensive manual for free from manualshive.com, and get instant access to step-by-step instructions, troubleshooting tips, and expert advice to enhance your Huawei 3 Series experience.

Share
Download
background image

Button

Description

Abs(

Absolute. Inserts the text ABS( into the math expression. The ABS function takes the absolute value of the
expression.

Sine(

Inserts the text SIN( into the math expression.

Cosine(

Inserts the text COS( into the math expression.

Tangent(

Inserts the text TAN( into the math expression.

FFT(

FFT Magnitude. Inserts the text Fft( into the math expression. Select one of the waveforms as an argument to the
function. This function creates an FFT waveform that shows the magnitude components of the source signal.

Rad(

Radians. Inserts the text RAD( into the math expression. The function expresses the value of the expression in
Radians.

Deg(

Degrees. Inserts the text DEG( into the math expression. The function expresses the value of the expression in
degrees.

Trend(

Inserts the text Trend( into the math expression.

Var1(

Inserts the text Var1( into the math expression.

Var2(

Inserts the text Var2( into the math expression.

Meas

Opens the Pick Measurement configuration menu. Selecting a measurement enters the measurement into the
math expression and closes the menu. See 

Pick Measurement

 on page 196.

Pick Measurement

Use the Pick Measurement menu to pick measurement to add to the measurement expression.

To access the Pick Measurement configuration menu:

1. From the math Equation Editor, tap Meas. The Pick Measurement configuration menu opens.
2. Select a measurement from the displayed list. Selecting a measurement adds the string to the math expression and closes the menu.

Pick Measurement menu fields and controls

 

Field or control

Description

Amplitude

List all available amplitude measurements that you can add to an equation.

Timing

List all available timing measurements that you can add to an equation.

Other

List all available other measurements that you can add to an equation.

Reference waveform configuration menu

Use this menu to configure display settings for a reference waveform.

To open a reference waveform configuration menu, double-tap a Ref badge on the Settings bar.

Reference waveform configuration menu fields and controls

 

Field or control

Description

Display

Turns On or Off displaying the waveform.

Table continued…

Menus and dialog boxes

3 Series Mixed Domain Oscilloscope Printable Help

196

Summary of Contents for 3 Series



























































































































































































































































































Reviews:

No comments

Related manuals for 3 Series

Bartscher 700 Series Instructions For Installation, Use And Maintenance Manual preview
700 Series
Brand: Bartscher Pages: 22
B&K 700 Calibration Manual preview
700
Brand: B&K Pages: 5
B&K 1621 Instruction Manual preview
1621
Brand: B&K Pages: 28
Panasonic HF Series Quick Start Manual preview
HF Series
Brand: Panasonic Pages: 9
Datavideo HS-600 Instruction Manual preview
HS-600
Brand: Datavideo Pages: 50
Waterous Eclipse Installation, Operation And Maintenance Manual preview
Eclipse
Brand: Waterous Pages: 90
Campbell SC105 Product Manual preview
SC105
Brand: Campbell Pages: 14
Gainsborough K223 Quick Manual preview
K223
Brand: Gainsborough Pages: 2
Gainsborough H590 Instructions For Use preview
H590
Brand: Gainsborough Pages: 2
Gait up GAIT UP GO Quick Start Manual preview
GAIT UP GO
Brand: Gait up Pages: 12
Gait up Physilog 6S Quick Start Manual preview
Physilog 6S
Brand: Gait up Pages: 6
Gaiam Stability Ball Setup, Workout Tips And Care & Safety Manual preview
Stability Ball
Brand: Gaiam Pages: 2
Pari Trio Instructions For Use Manual preview
Trio
Brand: Pari Pages: 12
laerdal SimPad PLUS Wi-Fi Setup preview
SimPad PLUS
Brand: laerdal Pages: 2
laerdal SimPad PLUS Important Product Information preview
SimPad PLUS
Brand: laerdal Pages: 104
laerdal SimPad User Manual preview
SimPad
Brand: laerdal Pages: 33
laguna POWER CLEAN Operation And Maintenance Manual preview
POWER CLEAN
Brand: laguna Pages: 16
Lafayette LL-15 User Manual preview
LL-15
Brand: Lafayette Pages: 2

Brands by name

Popular brands

Load more brands