Technology Solutions
Instruction Manual
Tek-Flux 1400A
www.tek-trol.com
25
NOTE
When using the “Compound” key, you should press “Compound” key and “Up” key
both or “Compound” key and “Down” key both.
To select the zero correction about the flow directly use “Down” or “Up” to Switch.
To set or correct working parameters, the converter should be running in Parameters
Setting Way instead of Measuring Status. In Measuring Status, press “Compound” +
“Enter” keys getting to the select of parameter and transfer password (0000), and then
correct the password with one of the new passwords that are provided by
manufacturer. Finally, press the “Compound” +” Enter” keys to work in Parameters
Setting Way. There are 6 Passwords in design and among them 4 for deferent
operators in secret and 2 are fixed passwords for system operation.
5.2.2
Keys for Selecting Menu
•
Press “Compound “+” Enter” keys to select menu. Press “Up” or “Down” keys to
select the parameters.
Code
Function
Notes
1
Parameters Set
Select this function; It can enter the picture of
parameter
•
Parameter Setting
Press “Compound” + “Enter” key, it displays “Parameters Set” function.
Input password. Press “Compound” + “Enter” key. This function lets the user
access Parameters Setting status. Need to enter parameter code.
•
Menu
There are 46 parameters of Tek-Flux 1400A, user can set every parameter.
The List of Parameters is shown below:
5.2.3
Menu
Parameters of converters can decide the running status, process and output ways as
well as state of output. Correct option and setting of parameters can keep the
converters running optimally and get higher accuracies of output bother in display and
in measurement.
There are 6 grades of passwords for setting parameters function. Grades 1 to grade 5
of passwords are for users and grade 6 of password is for manufacturer. Users can
reset their passwords of grades 1 to 4 in grade 5.
Users can check converters parameters in any grade of password. However, if users
want to change parameters of converters, deferent grade of parameters have to be
used by the users.
•
Grade 1 of password (set by manufacturer as 00521):
Users can only read parameters.